My Crossword Maker Logo
Powered by BrightSprout
Save Status:
or to save your progress. The page will not refresh.
Controls:
SPACEBAR SWITCHES TYPING DIRECTION
Answer Key:
Edit a Copy:
Make Your Own:
Crucigrama Sopa de Letras Hoja de Trabajo
Calificar este Puzzle:
Log in or sign up to rate this puzzle.

Chapter 9: Film Processing

Horizontales
Is seen when the film emulsion is damaged by the operator's fingernail during rough handling of the film
Are seen when the developer solution comes in contact with the film before processing
Results when the soft film emulsion is removed from the film base by a sharp object, such as a film clip or film hanger
Results from the following: Improper safelighting and light leaks in the darkroom, Improper film storage, outdated films, contaminated processing solutions, high developer temperature
Results when a film is subjected to a sudden temperature change between the developer solution and the water bath.
Result from the following: use of exhausted developer or fixer, insufficient fixing time, insufficient rinsing.
Results from the following: accidental exposure of the film to white light. Torn or defective film packet that expose a portion of the film to light
Verticales
Is seen when fingers contaminated with fluoride or processing solutions have touched the film
Are seen when air is trapped on the film surface after the film is placed in the processing solution.
May result from the following; opening a film packet quickly, opening a film packet before touching another object such as the film processor or countertop in a carpeted office.
Results from a low level of developer solution and represents an undeveloped portion of the film
May result from the follwoing: Inadequate development time, Inaccurate timer, Low developer temperature, Inaccurate thermometer, Depleted or contaminated developer solution
May result from the following: Excess development time, Inaccurate timer, High developer temperature
Results from a low level of fixer solution and represents an unfixed portion of the film
Are the result of fixer solution coming in contact with the film before processing