A drill bit that includes steps which enable the user to cut holes in metal to a desired diameter.
A rating that describes the maximum amps a battery can provide continuously for up to 60 minutes. Drawing more amps than the battery’s rating is possible, but it reduces the amount of time before the battery is drained.
A small, T-shaped steel piece used to open and close the chuck on power drills. Cordless drills typically do not have a chuck key.
A substance, such as sandpaper, that is used to wear away material.
The common power supplied to most all wired devices, where the current reverses its direction many times per second. AC power is the type of power generated and distributed throughout settled areas.
Protection against short circuits; a safety device cuts power off as soon as it senses any imbalance between incoming and outgoing current.
A small lever, switch, or part that can be used to activate a locking catch or spring to hold a power tool trigger in the operating mode without finger pressure.
Describe one complete charge and discharge cycle for a rechargeable battery.
The end of a circular saw shaft where the blade is mounted.
A drill bit with a spiral cutting edge for boring holes in wood and other materials.
A drill bit with a carbide tip designed to penetrate materials such as stone, brick, or concrete.
A drill bit that uses a lead screw to pull the larger rear portion of the bit into the wood, making it simple to drill larger holes.
A clamping device that holds an attachment; for example, the chuck of the drill holds the drill bit.
A safety attachment used to prevent whiplashing in hoses when they are inadvertently uncoupled.
Verticales
The rotational speed of a motor or shaft, based on the number of times it rotates each minute.
Moving backward and forward on a straight line.
An electric power supply where the current flows in one direction only. DC power is supplied by batteries and by transformer-rectifiers that change AC power to DC.
A measurement of the power the tool can deliver.
A bit designed for use in wood or similar soft material. The design allows it to drill a flat-bottom blind hole in material.
The channel created by a saw blade passing through the material, which is equal to the width of the blade teeth.
A granular, sand-like material used to make sandpaper and similar materials abrasive. Grit is graded according to its texture. The grit number indicates the number of abrasive granules in a standard size (per in or per cm). The higher the grit number, the more particles in a given area, indicating a finer abrasive material.
A bit or drill used to set the head of a screw at or below the surface of the material.
A very hard material made of tungsten carbide and heavy metals such as cobalt. Commonly baked on to the tips of masonry bits and to the edges of saw blades.
The turning force produced by the drill. As the bit’s turning speed increases, torque decreases, and vice versa.
The smooth part of a drill bit that fits into the chuck.
LISTA DE PALABRAS:
Sign Up
Log In
Make a Suggestion
We're always looking for ways to make My Crossword Maker
better and can't wait to hear what suggestions you have :)
Your Email:
Suggestion:
Report an Issue
Quick Answers:
Where is my puzzle?
All your puzzles are accessible from your 'My Puzzles' page, which you can access using the navigation bar at the top when you are logged in.
Be sure to log in using the same email address you used when you created your puzzle.
How do I print?
There is a 'Make Printable' button on the top left of your puzzle that will let you sign up for a plan or purchase a single puzzle.
Once paid, that button will turn into a 'Preview + Publish' button that will put your puzzle in a format that can be printed or solved online.
Once you publish your puzzle, you can click the print icon or use your browser’s print function.
It looks weird when printed.
First make sure you’ve published your puzzle. See the 'How do I print?' section above for more information.
99% of other printing issues have to do with printer settings. Instead of trying to fiddle with printer settings, which can be time-consuming and frustrating, there are a couple workarounds you can try.
You can try printing from a different browser, since different browsers have different default print settings. Alternately, you can try saving as a PDF (next to the print icon) and print that.
Why isn’t this free?
We invested in building a number of premium features that free sites are unable to offer: the ability to automatically or manually add words to your puzzle, save-as-you-go puzzle editing, the ability to access your puzzles from any computer, an uncluttered and ad-free interface, the ability for friends and colleagues to solve your puzzles online, and quick responsiveness to reported issues.
My Crossword Maker is the lowest-price service we've found that provides these features, and is designed for people who are not satisfied with what free sites are able to provide.
I thought this was free.
We’re sorry you thought My Crossword Maker was free, that must have been frustrating.
We’re constantly trying to provide a clear and straightforward user experience, and we’re not trying to hide the price: on the page where you make your puzzle, the price is listed in the overview in the top left (before you log in), below the 'Make Printable' button (after you log in), in the FAQ below the grid, and also in the tour.
Unfortunately, we have limited control over how we show up in Google and on other sites, so if they show My Crossword Maker when someone searches for a free site we can’t do anything about that.
It says there is no account with my email.
First check whether you used a different email address to create your account. Your login email is the email address where you received a welcome email from us.
Alternately, it’s possible there was a typo in your email when you created your account. If so, report an issue below and provide the name and last four digits on the card you used when you signed up. We’ll use this information to track down your account.
I am being asked to pay a second time.
If you are a member of My Crossword Maker and are still being asked for payment, then you may have inadvertently created a second account.
Your paid account will have the email address where you received an email confirming your subscription.
If you never received such an email, or are still unable to find your paid account, report an issue below and provide the name and last four digits on the card you used when you signed up. We’ll use this information to track down your account.
My password reset isn’t working.
For security a human can’t see or reset your password, so read the below information carefully.
If you haven’t gotten the password reset email, check your spam folder, be sure you’re checking the email account that the email was sent to, and be aware that some school email systems block emails from non-school email addresses.
If you have the password reset email but the password isn’t accepted, be sure you are using the most recent password reset email: sometimes people will hit the button twice, and only the second password will work.
Be sure if you copy-paste the password not to get a space on the outside, or if you're typing it keep in mind that it's case-sensitive and that a lower-case L can look like the number 1, etc.
How do I cancel?
You can cancel your subscription from your 'My Account' page, which you can access using the navigation bar at the top when you are logged in.
Support representatives cannot cancel a subscription on your behalf.
Not all my words are in my puzzle.
When you hit the 'Arrange' button, our algorithm will try to arrange all your words on the grid, and will move words around to try to fit the most words.
This will get all the words on the grid about 90% of the time, depending on the word list. For the other 10%, you will get an alert explaining that the words that did not fit were added to the scratchpad.
It prints on two pages.
Big puzzles won’t always print on one page — the clues and grid are the smallest we could make them while keeping them readable for everyone.
That said, different browsers print in slightly different ways, so you could try using 'print preview' using a different browser (or try the PDF button) to see if you like how that looks better.
I didn’t hear back from you.
We generally respond to all reported issues in about a day. If it’s been a few days and you haven’t heard back from us, it’s possible we sent an email that didn’t reach you.
Check your spam folder, and be aware that some school email systems block emails from non-school email addresses. Try providing a different email address if you think our emails to you are being blocked.
Answers take about a day. Try the Quick Answers above for a faster resolution.
Where is my puzzle?