My Crossword Maker Logo
Powered by BrightSprout
Save Status:
or to save your progress. The page will not refresh.
Controls:
SPACEBAR SWITCHES TYPING DIRECTION
Answer Key:
Edit a Copy:
Make Your Own:
Crucigrama Sopa de Letras Hoja de Trabajo
Calificar este Puzzle:
Log in or sign up to rate this puzzle.

Low pressure boilers #1b unit 3

Unit #1 Steam Book
Horizontales
A burner that atomizes fuel oil to increase contact with combustion air for maximum combustion efficiency.
The burner firing rate when the maximum amount of fuel is burned in the furnace.
A boiler whose MAWP is not more than 15 psi (103.4 kPa).
A pressure vessel that transfers heat to a heat transfer fluid (HTF)
The amount of steam, in pounds per hour (lb/hr), that the safety valve is capable of venting at the rated pressure of the safety valve.
pipe fitting with removable plugs that allow for cleaning and inspection of piping.
A boiler designed to operate with the negative pressure in the combustion chamber and the flue connection, creating a natural draft in the boiler flue.
A combustion chamber that is immersed in the HTF.
Mechanical draft from fans located before and after the boiler.
Verticales
A water-tube boiler that produces steam or hot water for commercial or medium-size applications.
A boiler that utilizes fire tubes containing the hot gases of combustion to heat the HTF that surround the tubes.
A combustion chamber that has HTF flow along the sides of the chamber.
A pressure gauge typically used to indicate the amount of vacuum present in the boiler.
The burner firing rate when the minimum amount of fuel is burned in the furnace.
A boiler designed to utilize a fan, a blower, or other machinery to create the pressure difference in the draft system.
A valve located on the surface blowdown line used to release water and surface impurities from the boiler.
A boiler system that supplies suitable water to the boiler at an appropriate temperature and pressure to maintain the steam cycle.
Valve located on the water column used to determine the boiler water level if the gauge glass is not functional.
A switch that starts the burner, controls the firing rate, or shuts down the burner based on steam pressure.
Mechanical draft from fans located before and after the boiler.
The only standard recognized worldwide for in-service inspection repairs and alteration of boilers and pressure vessels.